Material return method of metal slitter

There are two key methods for metal material slitting machine and equipment to return materials, one of which is rubber ring return. This type of method is generally used for the thick or wide strip products.

In general, the key to the material return rubber ring is to use acid and alkali resistant wear-resistant rubber, such as polyamine grease, also known as Uri rubber. In addition, a common vulcanized rubber is called butyronitrile palm grease.

The key to using this material is that they have high wear resistance and strong acid and alkali resistance, as well as strong corrosion resistance and deformation repair ability.

In the specific production and manufacturing, the key is to carry out the corresponding strength adjustment according to the thickness and material of the cut plate when manufacturing the spare parts according to the different materials cut by the metal material slitting machine and equipment.

In some cases, the strength range should be kept at 60 to 90 degrees. In addition, the specification and size of rubber ring shall be selected fairly. The key of apron specification is to determine its inner diameter according to the specification of cutter head and the specification of cutter head spacer.

In other words, in the case of using metal material slitting machine and equipment to solve the problem of plates, select the corresponding return rubber ring according to the thickness of the plates, which is likely to ensure that the appearance of the finished products is flat and famous.

Another material returning method for metal material slitting machine and equipment is called flat type material returning. At present, most of the returned wood boards used by the door are hard plastic, red dyed solid wood boards, etc., and another layer of anti scratch materials will continue to be attached under the name.

This type of material return method is mostly used for slitting of metal sheets with multiple specifications, models and small specifications, or for finished products with weak thickness and shape.